��֭ӰԺ

At a specialized laboratory in Germany, electrical tests have been successfully performed on a 1/15th scale mockup of the high voltage deck planned for MITICA, the ITER-sized neutral beam injector that will be tested in advance of installation on ITER at the PRIMA neutral beam test facility in Italy.

Positioned on four large gas-insulated columns at six metres above the floor, the 4 x 4 x 4 metre mockup was subjected to high voltage testing in order to validate the design choices of the European Domestic Agency supplier SIEMENS AG.

In a 24-hour period, the mockup passed one long-duration test (5 hours at 1.2 million volts DC) and several short-duration tests (impulses of 50 micro-seconds at 2.1 million volts). The tests were designed to verify that the deck will sustain the different voltage levels that are expected during MITICA operation.

Read more about the high voltage tests on the European Domestic Agency . For more on PRIMA, click here.

A new acronym is making its way into the fusion landscape: DONES, for DEMO Oriented Neutron Source.

In Europe, a roadmap* for the realization of fusion energy was published in 2012 that breaks down the quest to supply fusion electricity to the grid into eight missions. One of these is to investigate and select neutron-resistant materials for DEMO, the demonstration fusion reactor that—according to the European strategy—is the step between ITER and a commercial fusion power plant.

More powerful than ITER and connected to the grid, DEMO will require materials capable of withstanding a stronger flux of neutrons for longer periods.

Currently three R&D projects carried out with the framework of a scientific collaboration between Europe and Japan (the ) are contributing to the design of DEMO. The engineering design and validation activities for the International Fusion Materials Irradiation Facility (IFMIF/EVEDA) are evolving successfully. But when its operation will come to an end, DONES, a future version of IFMIF, will take over and help the scientific community to perform tests and start collecting data.

Designed to mimic the conditions of neutron irradiation in DEMO, DONES would allow scientists to test materials and characterize candidate fusion materials.

Three European countries—Croatia, Poland and Spain—have expressed interest in hosting the facility. In September, the European Domestic Agency for ITER, which acts as a coordinator for the European activities of the Broader Approach, invited representatives from all three to a technical information session in Barcelona to explain the scope of DONES, outline preliminary technical specifications, and discuss the different steps leading to the submission of applications.

Read the full article on the European Domestic Agency .

*The was published by EFDA (the European Fusion Development Agreement, superseded in 2014 by EUROfusion).

In the Poloidal Field Coil Winding Facility, on site at ITER, fabrication of a qualification mockup of poloidal field coil #5 (17 metres in diameter) began in September.

Click to view a timelapse video produced by the European Domestic Agency for ITER. More information on the manufacturing process .

At the , on the Neva River near Saint Petersburg (Russia), manufacturing work is underway on ITER's poloidal field coil, #1 (PF1).

Click to view the different stages of fabrication of this 200-tonne component, the smallest of ITER's six ring-shaped magnets. (ITER Russia)

The Japanese Domestic Agency has delivered a large number of books and teaching materials to the Japanese section of the Provence-Alpes-Côte d'Azur International School (), which caters to the families of ITER staff as well as to the regional population.

This is the third book donation made by ITER Japan to the Japanese language section and its pupils since the school opened in 2007. The school currently hosts six language sections (Chinese, English, German, Italian, Japanese and Spanish), where teaching is divided between the host language (French) and the language of the section.

The books were presented in a ceremony on 30 September by the head of the ITER Japan Liaison Office, Katsumi Nakajima, to school director Bernard Fronsacq.

For the third year in a row, the Swiss Plasma Center is offering a free Massive Open Online Course (MOOC) on plasma physics.

The popular class is divided into two parts--the basics of plasma physics, followed by applications of plasma physics (including fusion). Students can follow the segment sequentially, at their own pace, or begin with the more advanced course.

The class, which begins on 13 October, is given in English by plasma physicists from the Swiss Plasma Center.

More information .

Prof. Stewart Prager, a world-renowned plasma physicist and passionate voice for a future of clean, abundant and benign energy fueled by fusion, has stepped down from the directorship of the national laboratory he has headed for the last eight years. [...]

Prager, the sixth director in the 65-year history of the Princeton Plasma Physics Laboratory (PPPL), joined the lab in the fall of 2008 after a long career at the University of Wisconsin. A pioneer in plasma physics, he is internationally known for experiments that contribute to the fundamental knowledge of fusion energy and the design of devices that will produce it.

Read the full article on the PPPL .

The last shipment of cryostat base segments (three segments/120 tonnes each) left Hazira, India on 2 September. Prior to being shipped, on 16 August, a flag-off ceremony was held at the Larsen & Toubro Ltd plant, where the cryostat segments are being manufactured. With this shipment, due to reach France after a month-long sea journey, India has completed shipment of all major pieces of the cryostat base (tier-1 and tier-2). Welding operations for Tier 1 of the cryostat base have already begun on the ITER site.

Marconi-Fusion, the new high performance computer for fusion applications, was inaugurated on 14 September 2016 at the CINECA headquarters in Bologna.

Supercomputing is an important aspect of nuclear fusion research as it plays a crucial role in the modelling of the plasma and materials, validating the experimental results of fusion devices and designing the next-generation fusion machine DEMO. Marconi Fusion should be capable of a total computational power of around 6 petaflop per second, thanks to the modern generation of Intel Xeon processors. A petaflop means 1015 operations per second... a total of a one quadrillion head-spinning calculations simutaneously. 

The goal of this system will be to provide a common high performance computing platform for European fusion researchers.

In 2015 EUROfusion's highest decision-making body, the General Assembly, selected the Italian research unit  along with , the largest Italian computing centre, to develop and run the new system.

The supercomputer was named after Guglielmo Giovanni Marconi, the inventor of wireless communication, who was born in Bologna in 1874. 

Source:

From 28 April to 4 May 2017, the Ettore Majorana Foundation in Erice, Sicily, will host the 16th edition of the International School of Fusion Reactor Technology (ISFRT16).

The course will cover areas of interest to the magnetic fusion confinement (tokamak, stellarators), inertial confinement, and plasma physics scientific communities, with particular focus on developments in diagnostics and technology in view of ITER and the machine that comes after ITER, DEMO.

ISFRT16 is open in particular to students and researchers wishing to enter this new field. Lectures will cover current developments in theory and experiments but are also intended to give the basics of the field. Poster sessions are planned to allow participants to show their work.

Registration ends on 28 February 2017. More information on the conference .

At the Srednenevsky Shipbuilding Plant in Russia, technicians have completed the winding operations for the first poloidal field double pancake—one of eight double pancakes that will be stacked to form ITER's smallest ring magnet, poloidal field coil 1 (PF1).

During the next stage in the manufacturing process, the completed pancake will be impregnated with epoxy resin. The resin hardens the glass tape that is wrapped around the conductor to bind the double pancake into a rigid assembly. Following the successful manufacturing readiness review for the technique, called vacuum-pressure impregnation, impregnation activities on the first PF1 pancake will begin in October.

ITER's poloidal field coils are fabricated from niobium-titanium superconductor, which becomes superconducting at super-low temperatures.

Of ITER's six poloidal field coils, PF1 is the first to proceed to the impregnation stage of the fabrication process, which involves winding and impregnating each double pancake before forming the final assembly.

More on the poloidal field magnets here.

Image: The winding table at the Srednenevsky Shipbuilding Plant.

Temperatures of over hundred million degrees centigrade and high energy neutrons and alpha particles that blast everything to shreds. What materials can withstand the harsh conditions in fusion reactors? TU Delft researcher Inês Carvalho set out to discover.

Follow this  to the article.

Source: Technische Universiteit Delft.

On Saturday 10 September, close to 450 participants met near ITER, in Vinon-sur-Verdon, for a number of sporting events designed to create and reinforce ties between people working on the ITER Project and neighbours from the surrounding villages. The 2016 edition of the ITER Games offered a broad choice of sporting disciplines for all levels, including football, cross-country running, mountain biking, kayaking, tennis and petanque. The competitions were followed by a bucolic lunch and an afternoon of family activities.

The last of three electrical transformers have successfully passed factory acceptance tests in China and are ready for shipment.

China is responsible for procuring ITER's pulsed power electrical network (PPEN), which will feed power to the heating and control systems during plasma pulses.

As part of the procurement package, three massive PPEN transformers (15 metres tall, 460 tonnes when completely fitted out) have been manufactured by supplier Baodin Tianwei. The first of these reached the ITER site in June 2016; now, following the successful completion of factory acceptance tests, the last two are ready for shipment.

--ITER China

For the third year in a row, representatives of the ITER Domestic Agencies of China, Japan and Korea met to report on progress in the procurement and manufacturing of ITER components and exchange on technical issues. Nearly 60 participants were present for the workshop which was held from 27 to 28 July at the Haeundae Grand Hotel in Busan, Korea.

Openings made by representatives from each government were followed by reports on manufacturing progress achieved since the last trilateral meeting, including progress on components for the ITER blanket, the divertor, the test blanket systems, magnets, the vacuum vessel and diagnostics. Focus discussions took place on forward-looking topics such as warranty after delivery, on-site installation work at ITER and the potential for further collaboration.

Participants also visited the Hyundai Heavy Industry workshop (pictured) in Ulsan, Korea, where manufacturing is underway on segments of the ITER vacuum vessel and toroidal field coil structures.

A fourth China-Japan-Korea trilateral workshop is planned next year in China.

The Princeton Plasma Physics Laboratory (PPPL) has been named principal investigator for a multi-institutional project to study plasma-materials interaction on the EAST tokamak in China. The experiments will be designed to test the ability of lithium to protect the EAST walls from the hot plasma and to prevent impurities from bouncing back into the core of the plasma and halting fusion reactions.

Success could point to a method for optimizing long-running plasmas.

PPPL will use devices called flowing liquid lithium limiters and granule injectors, as well as optimization of coating techniques, to protect the plasma-facing components. PPPL has experience with applying lithium to its National Spherical Torus Experiment (NSTX), which has recently been upgraded, and at the Lithium Tokamak Experiment (LTX), a small, short-pulse complementary experiment at the laboratory that explores the effect of a liquid-lithium boundary on the plasma.

See the full article on the PPPL .

--Photo of the interior of EAST vacuum vessel.

"Chirp, chirp, chirp." The familiar sound of birds is also what researchers call a wave in plasma that breaks from a single note into rapidly changing notes. This behaviour can cause heat in the form of high energy particles—or fast ions—to leak from the core of plasma inside tokamaks.

Physicists want to prevent these waves from chirping because they may cause too many fast ions to escape, cooling the plasma. As the plasma cools, the atomic nuclei in the tokamak are less likely to come together and release energy and the fusion reactions will sputter to a halt. 

"Chirping modes can be very harmful because they can steal energy from the fast ions in an extended region of the plasma," said Vinícius Duarte, a graduate student from the University of São Paulo. Duarte is at the U.S. Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL) conducting research for his dissertation. 

Chirping modes have been studied for decades as physicists seek to understand and eliminate them. In a recent theoretical study, Duarte discovered some conditions within plasma that can make the chirping of modes more likely. A paper he is preparing on this topic explains the phenomenon and may help to optimize the design of fusion energy plants in the future. 

See the full article on the PPPL .

Magnetic fusion energy and the plasma physics that underlies it are the topics of ambitious new books by Hutch Neilson, head of the Advanced Projects Department at the Princeton Plasma Physics Laboratory (US), and Amitava Bhattacharjee, head of the Theory Department at the Laboratory. 

The books describe where research on magnetic fusion energy comes from and where it is going, and provide a basic understanding of the physics of plasma, the fourth state of matter that makes up 99 percent of the visible universe.

The volume Magnetic Fusion Energy: From Experiments to Power Plants, edited by Neilson and published in June, introduces early career researchers to the current body of fusion work and points the way to breakthroughs still to be achieved. Bhattacharjee's book, the second edition of the text Introduction to Plasma Physics co-authored with Donald A. Gurnett of the University of Iowa, keeps pace with the fast- and ever-changing field. New topics in the book, which will be out this fall, range from tearing modes in fusion plasmas to particle acceleration by shocks to the magnetorotational instability in accretion disks that surround celestial bodies.

See the original announcement .

The Princeton Plasma Physics Laboratory (PPPL) has just released the annual edition of Quest, the laboratory's research magazine. This fourth edition highlights research underway on the recently upgraded spherical tokamak experiment NSTX-U.

Download the summer 2016 edition .

Plasma—the hot ionized gas that fuels fusion reactions—can also create super-small particles used in everything from pharmaceuticals to tennis racquets. These nanoparticles, which measure billionths of a metre in size, can revolutionize fields from electronics to energy supply ... but scientists must first determine how best to produce them.

After more than two years of planning and construction, the U.S. Department of Energy's Princeton Plasma Physics Laboratory (PPPL) has commissioned a major new facility to explore ways to optimize plasma for the production of such particles. The collaborative facility, called the Laboratory for Plasma Nanosynthesis, is nearly three times the size of the , which remains in operation, and launches a new era in PPPL research on plasma nanosynthesis. Experiments and simulations that could lead to new methods for creating high-quality nanomaterials at relatively low cost can now proceed at an accelerated pace.

Nanomaterials exhibit remarkable strength, flexibility and electrical conductivity. Carbon nanotubes, found in sporting goods, body armor, transistors and countless other products, are tens of thousands of times thinner than a human hair and stronger than steel on an ounce-for-ounce basis.

Plasma could serve as an ideal substance for synthesizing, or producing, nanomaterial. The new laboratory will study so-called low-temperature plasmas that are tens of thousands degrees hot, compared with fusion plasmas that are hotter than the 15-million-degree core of the sun. These low-temperature plasmas contain atoms and free-floating electrons and atomic nuclei, or ions, that can be shaped by magnetic fields to provide reliable, predictable and low-cost synthesis of tailored nanoparticles.

Read the full article at .

-- Photo: Elle Starkman/PPPL