ÌÒÖ­Ó°Ôº

Title

IPA for Mechanical & Radio Frequency integration of the IC Antenna test facility

Vue d'ensemble

EOI Reference Number: IPA-7903 
Department: ITER Construction Project 
Division / Program: Heating & Current Drive Program
Section / Project: Ion Cyclotron & Lower Hybrid Section
​Duration: 12 Months (renewable upto 36 Months)
​Number of IPAs: 1 
​Location of the Position: ITER Organization Headquarters (on-site)

Ref. code

IPA-7903

Application deadline

21-05-2025

Description

Purpose/Scope:

The purpose of this assignment is to:

• Produce the ICH Antenna prototype High Power test bench layout (full facility integration and component development);
• Review ICH Antenna prototype manufacturing data;
• Produce part of the Radio Frequency Sources Final Design Documentation;
• Review the Final Design package of the Radio Frequency Sources

1. ICH Antenna prototype test facility:

• Executes the Antenna prototype test facility layout in ENOVIA;
• Elaborates on the technical specification for the installation contract;
• Creates 2D diagrams for the RF test plant;
• Produces assembly procedure for the generator cavity, the transmission lines, and the prematching system;
• Reviews the IC Antenna prototype manufacturing data, with respect to the test bench integration capability;
• Establishes maintenance and commissioning procedures;
• Reviews mechanical analysis and thermal analysis.

2. Radio Frequency Sources FDR:

• Finalizes the RFS mechanical layout
• Reviews the Engineering analysis as part of the design justification
• Reviews / produce installation procedure
• Verifies integration of the RFS within building 20
• Produces the technical specification for the RSF mismatch transmission lines (and other components in the IO scope)

Profesional Experience:

•  6 - 9 years 

 Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹

•  Master/Engineering degree/ eqivalent  

 Language Requirements:

• Fluent in English (written and spoken)   

 Technical Competencies and Experience:

• Mechanical engineering experience

• Radio Frequency expertise

• Knowledge in the development of Radio Frequency components

• Solid skills in the engineering analysis

• Use of CAD software (CATIA) and familiar with ENOVIA environment

• Understanding of 2D schematic and diagrams

Specific Training to Perform the Assignment: 

• High voltage training
  Low voltage training
• CATIA training

 Specific Requirements and Conditions:

• at least 6 year of experience in Mechanical Engineering

  capability of revieweing Engineering analysis (thermo-mechanical, seismic...)

  past experience in indutrail contract follow up

  capability of producing high quality document (such as technical specification, installation, and maintenance procedures)

Financial Aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for Tokamak Cooling Water System Engineering Work Packages

Vue d'ensemble

EOI Reference Number: IPA-7889 
Department: ITER Construction Project 
Division / Program: Plant Systems Program
Section / Project: Cooling Water System Project
​Duration: 48 Months 
​Number of IPAs: 1 
​Location of the Position: ITER Organization Headquarters (on-site) 

Ref. code

IPA-7889

Application deadline

21-05-2025

Description

Purpose/Scope:

Mechanical Design Engineers (Piping and Structural) are required to support the Cooling Water System (CWS) Project. In particular, they will support the CROs (Contract Responsible Officers) and TROs (Technical Responsible Officers), for the following items:

• To perform/review piping stress analysis and support design/drawings of the CWS systems, making sure that they are properly performed, respect all interfaces, and are consistent among them and the 3D model.
• To support and lead CAD designers to finalize the CWS 3D models configuration, taking into account the different constraints such as building penetrations, supporting structures (platforms, building interfaces), and other systems (integration), etc. in relation to CWS equipment and/or piping.
• To develop construction design (e.g., pipe spooling) and propagate in the relevant documentation (e.g., isometrics, support drawings, bill of materials, etc.) in line with the construction and assembly sequence (CAS) and the pre-assembly / installation of the Cooling Water System (CWS);

The IPA shall contribute to the production of the overall associated documentation (e.g., calculations\analysis reports, 3D models, drawings, bill of materials).

• Perform thermo-mechanical calculations for piping, supports (from single pipe support to steel structure platform), and pipe crossing elements (building penetrations);
• Support and lead CAD designer for the completion of the CWS layout in the Tokamak building;
• Support integration, clarification of interfaces for CWS piping and equipment with all the interfacing clients, other disciplines, and Departments;
• Ensure physical and functional integration of CWS systems in the complex ITER environment;
• Contribute to the Area Analysis Events for CWS and associated supporting functions;
• Support the production of 3D models, construction drawings, and Bill of Materials (BoMs) to be issued for construction, such as piping isometrics, GA drawings, support drawings, pipe and fittings bill of materials;
• Contribute to the development of the Engineering Work Packages (EWPs) to be delivered to the construction contractor for the pre-assembly and installation of the CWS systems;
• Contribute to the resolution of issues\clarifications raised during MRR\CRR (Manufacturing\Construction Readiness Review) phase. Propose resolutions of issues to the TRO;
• Contribute to the resolution\answer to the construction contractor Requests For Information (RFI) and to the construction follow-up with related Non-Conformities (NCR) and Field Change Requests (FCR).

Profesional Experience:

• More than 9 years 

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹

•  Master/Engineering degree/ eqivalent  

Language Requirements:

• Fluent in English (written and spoken)   

Technical Competencies and Experience:

A degree in Mechanical or Structural Engineering or equivalent experience in an industry/engineering company.

The IPA shall have extensive and proven experience in similar job(s) as follows:

• Excellent knowledge of performing thermal, structural, and seismic analysis.
• Experience in piping stress analysis using INTERGRAPH CAESAR II software is considered an advantage.
• Experience in structural stress analysis using INTERGRAPH GT STRUDL software is considered an important advantage.Experience in FEM analysis with ANSYS is considered an advantage.
• Good knowledge of integration and layout arrangement in a nuclear environment of piping, supports, valves, pumps, and heat exchangers.
• Experience in using standards like ASME B31.3, ASME VIII, etc.
• Knowledge of AVEVA E3D CAD software
• Experience in the use of CATIA CAD software is considered an advantage.
• Experience in maintenance design and maintenance implementation in a crowded area.
• Ability to write clearly and concisely, and to summarize and communicate complex issues.
• Ability to use MS Office standard (Word, Excel, PowerPoint, Outlook).
• Ability to work effectively in a multi-cultural environment. Ability to work in a team and to promote teamwork.
• Ability to communicate effectively internally and with external partners and suppliers.
• Fluent in English (written and spoken).

Specific Training to Perform the Assignment:

• Aveva E3D and Catia 

Financial Aspects
Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for Secondary Cooling Water System Process

Vue d'ensemble

EOI Reference Number: IPA-7885 
Department: ITER Construction Project 
Division / Program: Plant Systems Program
Section / Project: Cooling Water System Project
​Duration: 48 Months 
​Number of IPAs: 1 
​Location of the Position: ITER Organization Headquarters (on-site)

Ref. code

IPA-7885

Application deadline

17-05-2025

Description

Purpose/Scope:

The Associate for the ITER Cooling Water System Project will perform steady-state and transient thermal-hydraulic calculations for the different Cooling Water loops.

• Support updating Coolong Water System (CWS) hydraulic models, system sizing datasheets, system sizing reports, design condition reports and overpressure protection design, due to PCRs and feedback from commissioning team impacting Cooling Water system updating Chilled Water System (CHWS-1A) thermal hydraulic model and system sizing report in preparation for CHWS-1A FDR
• Update CHWS-1B water-hammer analysis as per current design.
• Perform CHWS-1A water-hammer analysis as per current design.

Profesional Experience:

• More than 9 years 

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹

• Master/Engineering degree/ eqivalent  

Language Requirements:

• Fluent in English (written and spoken)   

Technical Competencies and Experience:

• Sizing calculations of nuclear cooling systems;
• The Control Processes of Cooling Systems for Nuclear Power Plants or nuclear facilities is considered an advantage.
• Project Management from design, procurement, and manufacturing of cooling systems;
• RELAP5 system code for transient thermal-hydraulics analyses is required;
• Software for thermal-hydraulics steady state analyses (e.g. AFT Fathom) is required;
• MELCOR software would be an advantage;
• Specific software for Computational Fluid Dynamics (CFD) calculations would be an advantage;
• 2D-3D CAD software (AVEVA E3D or Catia and See-Visio) is appreciated.

Specific Training to Perform the Assignment: 

Aveva E3D and Catia 

Financial Aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for Tokamak Cooling Water System Engineering Work Packages Fabrication

Vue d'ensemble

EOI Reference Number: IPA-7888 
Department: ITER Construction Project 
Division / Program: Plant Systems Program
Section / Project: Cooling Water System Project
​Duration: 48 Months 
​Number of IPAs: 1 
​Location of the Position: ITER Organization Headquarters (on-site) 

Ref. code

IPA-7888

Application deadline

17-05-2025

Description

Purpose/Scope:

Mechanical Design Engineers (Piping and Structural) are required to support the Cooling Water System (CWS) Project. In particular, they will support the CROs (Contract Responsible Officers) and TROs (Technical Responsible Officers), for the following items:

• To perform/review piping stress analysis and support design/drawings of the CWS systems, making sure that they are properly performed, respect all interfaces, and are consistent among them and the 3D model.
• To support and lead CAD designers to finalize the CWS 3D models configuration, taking into account the different constraints such as building penetrations, supporting structures (platforms, building interfaces), and other systems (integration), etc. in relation to CWS equipment and/or piping.
• To develop construction design (e.g., pipe spooling) and propagate in the relevant documentation (e.g., isometrics, support drawings, bill of materials, etc.) in line with the construction and assembly sequence (CAS) and the pre-assembly / installation of the Cooling Water System (CWS);

The IPA shall contribute to the production of the overall associated documentation (e.g., calculations\analysis reports, 3D models, drawings, bill of materials).

• Perform thermo-mechanical calculations for piping, supports (from single pipe support to steel structure platform), and pipe crossing elements (building penetrations);
• Support and lead CAD designer for the completion of the CWS layout in the Tokamak building;
• Support integration, clarification of interfaces for CWS piping and equipment with all the interfacing clients, other disciplines, and Departments;
• Ensure physical and functional integration of CWS systems in the complex ITER environment;
• Contribute to the Area Analysis Events for CWS and associated supporting functions;
• Support the production of 3D models, construction drawings, and Bill of Materials (BoMs) to be issued for construction, such as piping isometrics, GA drawings, support drawings, pipe and fittings bill of materials;
• Contribute to the development of the Engineering Work Packages (EWPs) to be delivered to the construction contractor for the pre-assembly and installation of the CWS systems;
• Contribute to the resolution of issues\clarifications raised during MRR\CRR (Manufacturing\Construction Readiness Review) phase. Propose resolutions of issues to the TRO;
• Contribute to the resolution\answer to the construction contractor Requests For Information (RFI) and to the construction follow-up with related Non-Conformities (NCR) and Field Change Requests (FCR).

•  More than 9 years 

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹

•  Master/Engineering degree/ eqivalent  

Language Requirements:

• Fluent in English (written and spoken)   

Technical Competencies and Experience:

The IPA shall have a degree in Mechanical or Structural Engineering or equivalent experience in an industry/engineering company. 

The IPA shall have extensive and proven experience in similar job(s) as follows:

• Excellent knowledge of performing thermal, structural, and seismic analysis.
• Experience in piping stress analysis using INTERGRAPH CAESAR II software is considered an advantage.
• Experience in structural stress analysis using INTERGRAPH GT STRUDL software is considered an important advantage.
• Experience in FEM analysis with ANSYS is considered an advantage.
• Good knowledge of integration and layout arrangement in nuclear environment of piping, supports, valves, pumps, heat exchangers.
• Experience in using standards like ASME B31.3, ASME VIII, etc.
• Knowledge of AVEVA E3D CAD software
• Experience in the use of CATIA CAD software is considered an advantage.
• Experience in maintenance design and maintenance implementation in a crowded area.
• Ability to write clearly and concisely, and to summarize and communicate complex issues.
• Ability to use MS Office standard (Word, Excel, PowerPoint, Outlook).
• Ability to work effectively in a multi-cultural environment. Ability to work in a team and to promote teamwork.
• Ability to communicate effectively internally and with external partners and suppliers.
• Fluent in English (written and spoken).

Specific Training to Perform the Assignment:

•  Aveva E3D and Catia 

Financial Aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA to support ITER Blanket Assembly Transporter development

Vue d'ensemble

EOI Reference Number: IPA-7897 
Department: Engineering Services Department 
Division / Program: Assembly & Commissioning Support Div.
Section / Project: Remote Handling Project
​Duration: 12 Months 
​Number of IPAs: 1 
​Location of the Position: ITER Organization Headquarters (on-site)

Ref. code

IPA-7897

Application deadline

09-05-2025

Description

Purpose/Scope:

The Blanket Assembly Transporter (BAT) is an in-vessel assembly equipment to perform assembly of the blanket modules inside of the ITER vacuum vessel. It is a redundant robotic arm with 10degree-of-freedoms and 10m-long reach. The blanket modules are composed of the first walls and shield blocks. The first walls weigh up to 1.4tons, and the shield blocks up to 3.1tons and 4tons depending on their locations.

The scope of the task is:

• To develop the BAT kinematic simulator to verify the design of the BAT and to demonstrate its compatibility with the in-vessel assembly sequences. It involves generating collision avoidance trajectories, interface checking with the other in-vessel assembly equipment, etc.
• To construct a BAT structural simulator. Flexible model of the BAT Transporter needs to be constructed considering the joint stiffness and body flexibility.
• To develop a control algorithm considering the flexibility of the BAT Transporter and a compensation algorithm through visual servoing and force control.
• To support IO TROs in the on-going technical follow-up of the work carried out by suppliers, including participation in regular technical coordination meetings and project progress reviews.

The main activities to be performed by the IPA are to:

• Develop the BAT kinematic simulator by using NVIDIA ISAAC SIM.
• Develop the GUI for the BAT kinematic simulator by using Python Qt library and ROS2.
• Develop inverse kinematic algorithms by using constrained nonlinear optimization algorithms or global optimization algorithms (eg. Rapid Random Tree).
• Develop parallel computing techniques by utilizing the NVIDIA GPU.
• Construct a flexible model of the BAT Transporter and implement it to the BAT simulator.
• Develop parameter identification technique to calibrate the flexible model.
• Develop visual servoing and admittance force control of the flexible BAT Transporter for positioning of the end-effector to the blanket modules.
• Execute assembly operation scenario assessments;
• Carry out other related tasks, upon request from line management.

Profesional Experience:

•  3-6 years 

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹

•  Master/Engineering degree/ eqivalent  

Language Requirements:

• Fluent in English (written and spoken)   

Technical Competencies and Experience:

Experience in robot simulator and programming will be an advantage. High level of programming skill required;

• Python, C++, MATLAB/SIMULINK are required;
• Experience on robot simulator such as ISAAC SIM, Gazabo, or others will be an advantage. For information, the BAT simulator uses ISAAC SIM and its GUI is written using Python Qt library.
• Image processing (eg. OpenCV) experience is advantage.

Experience on CATIA V5 or Solidworks will be an advantage;

Microsoft Office package (Word, Excel, PowerPoint, Outlook);

Experience in complex and multidisciplinary projects would be an advantage;

Financial Aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA Buyer

Vue d'ensemble

EOI Reference Number: IPA-7837 
Department: Administration Department 
Division / Program: Procurement Division
Section / Project: Proc. Construction, Assembly & Logistics
​Duration: 36 Months 
​Number of IPAs: 1 
​Location of the Position: ITER Organization Headquarters (on-site) 

Ref. code

IPA-7837

Application deadline

05-05-2025

Description

Purpose/Scope:

The IPA shall conduct procurement tenders, chairing evaluating committees, awarding contracts, negotiating and concluding contracts. He/she shall be appointed to one or several user groups (pending the actual procurement needs existing at the time of employment) and interact with the TRO/CRO of those user group(s) on a daily basis to prepare the Technical Specifications and related tender documents

• Conduct Procurement Plan meetings twice per year
• Coordinate Procurements for allocated user group(s)
• Prepare and implement Tender procedures according procurement plans and using the IPROC procurement tool
• Chair Evaluation Committees for respective tenders for which the tender value is below 5 ME
• Prepare MAC papers when needed
• Award and negotiate offers with selected tenderers
• Prepare and administer contract signatures
• Make commercial follow up of signed contracts
• Assist the CRO with payment and claim issues
• Make contract amendments whenever needed during the implementation of the contract
• Close out of the allocated contracts
• Any other activity related to the overall IPA activities

3-6 years 

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹

• High School Diploma/Baccalaureate  
• IPROC update

Language Requirements:

Fluent in English (written and spoken)   

Technical Competencies and Experience:

• Savy with procurement tools
• ICPP procurement rules
• Tendering
• Evaluation committees
• Contract negotiations, 

Specific Training to Perform the Assignment:

Matrix organization and life cycle expendtiture

Specific Requirements and Conditions:

• Bachelor's Degree or equivalent in Procurement field or other relevant discipline;
• The required education degree may be substituted by extensive professional experience involving 
• Similar work responsibilities and/or additional training certificates in relevant domains.

Financial Aspects
Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for Ion Cyclotron Resonant Heating Physics & Operation

Vue d'ensemble

EOI Reference Number: IPA-7840
Department: ITER Construction Project
Division / Program: Heating & Current Drive Program
Section / Project: Ion Cyclotron & Lower Hybrid Section
‸¾³Ü°ù²¹³Ù¾±´Ç²Ô: 12 Months
​Number of IPAs: 1
​Location of the Position: ITER Organization Headquarters (on-site)

Ref. code

IPA-7840

Application deadline

30-04-2025

Description

Purpose/Scope:

The purpose of the IPA assignment is to find a highly skilled experimental Ion Cyclotron Resonant Heating (ICRH) physicist engineer that would provide expertise to the Ion Cyclotron Heating project on Physic and Operational aspects, in particular in the context of the new ITER Research Plan

List of activities:

The activities to be performed are

• the simulation of the ICRH scenario with respect to the latest ITER Research Plan outputs, with synergy with other heating system
• the computation of ICRH coupling cases with respect to the new maching configuration
• the production of high Radio Frequency (RF) test procedures to prepare the Antenna prototype high power RF test campaign
• to liaise with ITER phycic to generate inputs for usage in the RF modelling (density profiles, gas injection)
• to follow experiment performed in other fusion devices (Ion Cyclotron Wall Conditioning / RF heating) in order to consolidate the operational parameters for ITER cases
• to provide the RF and ICRH Physics expertize to the other ICH team members, as global team improvement

Experience & Profile:

Professional Experience:
More than 9 years

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹
Master/Engineering degree/equivalent

Language Requirements:
Fluent in English (written and spoken)

Technical Competencies and Experience:

• Experience in Fusion devices
• Experience in ICRH system operation
• control room expertize
• experience in the modelling of ICRH physics and coupling studies
• on the ground operation experience and debugging process of RF systems
• troubleshooting experience and day 1 commissioning expertize on RF plant

Specific Training to Perform the Assignment:

Hight Voltage Training
Low Voltage Training

Financial Aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support.

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for Mechanical/ structural engineer for Tritium Plant Systems early packages delivery

Vue d'ensemble

EOI Reference Number: IPA-7842
Department: ITER Construction Project
Division / Program: Plant Systems Program
Section / Project: Tritium Plant Project
‸¾³Ü°ù²¹³Ù¾±´Ç²Ô: 24 Months
​Number of IPAs: 1
​Location of the Position: ITER Organization Headquarters (on-site)

Ref. code

IPA-7842

Application deadline

28-04-2025

Description

Purpose/Scope:

Provides support to mechanical and structural engineering activities for the Tritium Plant Project for the scope defined in the 2024 baseline. Provides support for the preparation of the design packages needed for the first operations of the Tritium Plant and Detritiation System supply contract

List of activities:

• Becomes broadly familiar with the types of in-plant equipment and its layout planned at ITER with assistance provided by the ITER technical officers for DS and other Tritium Plant systems as needed;
• Reviews detailed drawings and layout and provides feedback to designers;
• Performs stress & flexibility calculations using software tools (such as CAESAR II) for piping design;
• Conducts structural analysis calculations using software tools (such as GT Strudl) for piping support design;
• Prepares analysis reports providing all required data using IO documentation templates for piping design verification, piping support verification, interface loads, and interface loads verification, etc.;
• Assists in the assessment of the loads in the supporting system, span of supports, and other analyses such as pipe flexibility analysis;
• Supports the definition of technical solutions for system layout and routing;
• Performs pressure vessel analysis using software such as PV ELITE;
• Drafts analysis reports incorporating all necessary data using IO documentation templates for vessel design verification, interface loads, and interface loads verification, etc.;
• Contributes to defining design solutions for the vessels, and interfacing items (nozzles, piping, supporting structures);
• Offers input for the 3D model evolution by generating written instructions to designers with possible options; supports assigned CAD designer(s);
• Assists in the preparation of specifications of interfaces, supporting structures, etc., in the drawings format;
• Creates CAD drawings/sketches; editing 3D models is of advantage
• Any other activity related to the IPA assignment scope

Experience & Profile:

Professional Experience:
6 - 9 years

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹
Master/Engineering degree/equivalent

Other Professional Training Required
CaesarII, AVEVA package, GT Strudl, PV ELITE

Language Requirements:
Fluent in English (written and spoken)

Technical Competencies and Experience:
Plant Engineering

Specific Requirements and Conditions:

• Mechanical engineer with design engineering skills for plant design disciplines such as piping design, pipe supports design & vessel design.
• Piping stress analysis tools such as CAESAR II; Structural analysis codes such as GT Strudl
• Vessel analysis/design tool such as PV ELITE
• Experience of design codes (ASME for piping & equipment; Eurocodes for structures)
• Advantageous: The 3D software tool is AVEVA E3D. 2D sketches and drawings to support design activities using software such as AutoCAD

Financial Aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support.

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for for piping/mechanical components and layout for early packages delivery

Vue d'ensemble

EOI Reference Number: IPA-7844
Department: ITER Construction Project
Division / Program: Plant Systems Program
Section / Project: Tritium Plant Project
‸¾³Ü°ù²¹³Ù¾±´Ç²Ô: 24 Months
​Number of IPAs: 1
​Location of the Position: ITER Organization Headquarters (on-site)

Ref. code

IPA-7844

Application deadline

28-04-2025

Description

Purpose/Scope

Provides support in AVEVA for piping/mechanical components and layout engineering activities for the Tritium Plant Project for the scope defined in the 2024 baseline. Provides support for the preparation of the design packages needed for first operations of Tritium Plant and Detritiation System supply contract

List of activities to be performed

• Becomes broadly familiar with the types of in-plant equipment and its layout planned at ITER with assistance provided by the ITER technical officers for Detritiation System (DS) and other Tritium Plant systems as needed;
• Reviews 3D models of REMS and Tritium Plant systems in plant environment identifying solutions for the plant layout optimization;
• Supports the development of detailed systems models for implementation of systems routings, supports, equipment interfaces, and interfaces between different PBS glove boxes;
• Prepares system layouts inside of the secondary enclosures such as Glove Box;
• Extracts and analyzes data from the AVEVA Engineering database including engineering lists and Bill of Materials (BOMs);
• Develops and Prepares drawings: GA drawings, equipment drawings;
• Assesses loads in the supporting system and evaluates the span of supports;
• Defines technical solutions for system layout and routing;
• Contributes to the evolution of the 3D model by generating written instruction for designers with possible options; and supporting assigned CAD designer(s);
• Supports the preparation of specifications for interfaces, supporting structures, etc. in the drawings format;
• Coordinates procurement, pre-fabrication, and construction activities related to the support structures;
• Reviews and analyzes clash status reports and proposes layout solutions for integration of REMS (PBS64) and Tritium Plant systems (PBS32) in the ITER configuration model;
• Verifies consistency between P&ID and 3D models, updating diagrams and 3D models to implement necessary Interface Point and Battery limits
• Any other activity related to the scope of the IPA assignment

Experience & Profile:

Professional Experience:
6 - 9 years

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹
Master/Engineering degree/equivalent

Other Professional Training Required
CaesarII, AVEVA package, GT Strudl, PV ELITE

Language Requirements:
Fluent in English (written and spoken)

Technical Competencies and Experience:
Plant Engineering

Specific Requirements and Conditions:

• Plant engineer with design engineering skills for plant design disciplines such piping design, pipe supports design
• Knowledge of Piping stress analysis tools such as CAESAR II and Structural analysis codes such as GT Strudl would be beneficial
• Knowledge of the piping design codes EN or ASME would be beneficial
• Experience of application of piping classes specifications and design codes (ASME for piping & equipment; Eurocodes for structures)
• Good knowledge of 3D software tool is AVEVA E3D. 2D sketches and drawings to support design activities using software such as AutoCAD
• Good knowledge of AVEVA Engineering and AVEVA P&ID software tools

Financial aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for Process engineering for Tritium Plant Systems early packages delivery

Vue d'ensemble

EOI Reference Number: IPA-7845
Department: ITER Construction Project
Division / Program: Plant Systems Program
Section / Project: Tritium Plant Project
‸¾³Ü°ù²¹³Ù¾±´Ç²Ô: 24 Months
​Number of IPAs: 1
​Location of the Position: ITER Organization Headquarters (on-site)

Ref. code

IPA-7845

Application deadline

28-04-2025

Description

Purpose/Scope

Provides support for process engineering for the Tritium Plant Project for the scope defined in the 2024 baseline. Provides support for the preparation of the design packages needed for first operations of Tritium Plant and Detritiation System supply contract.

List of activities to be performed

• Prepares and follows up on the Design Specification, datasheet, and selection of the piping parts, valve models for the Tritium Plant System (TP) systems, instrumentation
• Follows up on technical queries related to piping components.
• Handles sizing and technical queries for processing equipment.
• Prepares and reviews the Process Flow Diagram (PFD) and Piping and Instrumentation Diagrams (P&IDs)
• Drafts design basis documents, and system descriptions.
• Prepares Cause and Effect charts.
• Carries out or participates in engineering analysis such as HAZOP or process Failure Mode & Effects Analysis (FMEA)
• Prepares calculation notes
• Any other activity related to the scope of the IPA assignment

Experience & Profile:

Professional Experience:
6 - 9 years

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹
Master/Engineering degree/equivalent

Other Professional Training Required
AVEVA package, Caesar II, GT Strudl, PV ELITE

Language Requirements:
Fluent in English (written and spoken)

Technical Competencies and Experience:
Process Engineering

Specific Requirements and Conditions:

Knowledge of disciplines or similar experience in

• Low pressure Gas and liquid handling systems
• Low pressure Hydrogen handling systems
• Cryogenic distribution systems
• High purity gases system, vacuum systems
• Small bore tubing systems
• Semiconductor/phatmaceutical gases system

Financial aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for Divertor Cassette Assembly Integration

Vue d'ensemble

EOI Reference Number: IPA-7853
Department: ITER Construction Project
Division / Program: Tokamak Program
Section / Project: Divertor Project
‸¾³Ü°ù²¹³Ù¾±´Ç²Ô: 48 Months
​Number of IPAs: 1
​Location of the Position: ITER Organization Headquarters and Home Institute (on-site/off-site)

Ref. code

IPA-7853

Application deadline

25-04-2025

Description

Purpose/Scope:

The integration of 58 Cassette Assemblies will be executed mainly in China and partly at the IO Site. The first stages are related to mobilization, preparation of facilities and procedures, and prototyping. The Associate will contribute to this work. Series Production will begin at the end of 2026.

List of activities:

The IPA will report to the Divertor Cassette Assembly Integration responsible officer within the Divertor Project and refer to them for decision-making. Depending on the Associate's profile and experience, they will be involved in the following procurement oversight activities:

To support the definition of the requirements on Divertor-mounted Diagnostics and Operational Instrumentation:

• Define the list and scope of documents to be provided by the Divertor-mounted Diagnostics and Operational Instrumentation
• To support and interact with the Diagnostics and Operational Instrumentation contact persons and providers to develop the related documentation, in coordination with the Integrator

To support the technical development and review of the engineering documentation and procedures:

• Provide input and support for the development of the engineering documentation
• Provide input and support for the development of the QA/QC procedures

To support review and maintaining the contract's documentation in the project's documentation management systems:

• Facilitate the review of contract deliverables in IDM
• Follow-up the review of drawings in SMDD
• Initiate and support Material Approval Requests for new material or new proposed use in the material approval database

To prepare and execute the contract's gate reviews and contractual gates:

• Participate in review board selection and organization
• Ensure completion of the gate review input package
• Prepare and execute reviews
• Follow-up on any action or chit as a result of the review

To follow-up on the qualification of sites, equipment, personnel and procedures:

• Review qualification plan
• Ensure sequenced and timely qualification

To follow-up on scheduling & logistics, reception and final acceptance of the free-issued items:

• Follow-up on the delivery dates of the free-issued items
• Support organization of the transportation
• Follow-up the preparation and execution of the reception tests and final acceptance tests of the free issued items

To follow-up on the execution of the MIPs (Manufacturing and Inspection Plans) in the ITER MDB (Manufacturing DataBase):

• Follow-up the work execution progress based on MDB and release control points
• Prepare progress reports based on MDB and other inputs

To support the resolution of deviation requests and non-conformance reports:

• Help formalize any deviation request
• Facilitates the timely resolution of non-conformance reports
• Monitor the status of the Integrator's internal non-compliances

To follow-up on the execution of the Cassette Assemblies acceptance tests:

• Coordinate the preparation and support the execution of the Diagnostic FIIs functional tests
• Coordinate the preparation and execution of the CA's final acceptance tests

To coordinate the collection and implementation of lessons learned:

• To support the Integrator in summarizing lessons learned
• Ensure proper implementation of the lessons learned in the following stages or tasks

To prepare the EWPs and handover for installation:

• Help prepare the DCAI related Engineering Work Packages
• Support handover for installation

Experience & Profile:

Professional Experience:
6 - 9 years

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹
Master/Engineering degree/ equivalent

Language Requirements:
Fluent in English (written and spoken)
Mandarin (preferable)

Technical Competencies and Experience:

Education/ Know-How:

• Degree at least equivalent to master's degree in mechanical engineering or other relevant specialty
• Know-how in quality assurance, mechanical, material, welding or process engineering would be preferable
• Training in project management, high-vacuum, metrology, non-destructive testing of welds and material, stainless steel would be an asset

Technical and Project experience:

• At least 5 years' experience in the engineering of mechanical components or assemblies
• Experience with CAD design and/or structural analysis would be a strong asset
• Experience with CATIA and/or Ansys would be an asset

Social skills:

• Ability to work effectively in a multi-cultural environment
• Well organized and capable to self-train
• Ability to build consensus
• Ability to work in a team and to promote teamwork

Language requirements:

• Fluent in English (written and spoken)
• Computer and IT skills:
• Good command of the Microsoft Office package (Outlook, Word, PowerPoint, Excel)

Financial Aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support.

Fichier attaché

Template IPA HI Proposal V.2.4.0

Title

IPA for support to the manufacturing of the ITER Visible Spectroscopy Reference System I&C

Vue d'ensemble

EOI Reference Number: IPA-7868
Department: ITER Construction Project
Division / Program: Diagnostics Program
Section / Project: Plasma Core and Edge Project
‸¾³Ü°ù²¹³Ù¾±´Ç²Ô: 24 Months
​Number of IPAs: 1
​Location of the Position: ITER Organization Headquarters (on-site)

Ref. code

IPA-7868

Application deadline

25-04-2025

Description

List of activities to be performed

• Supports the preparation of the I&C Manufacturing Readiness Reviews and Design Reviews documentation of the Visible Spectroscopy Reference System (VSRS) diagnostic. Also, supports the generation of appropriate documentation, including technical review of the documentation prepared by the development teams of the DAs on visible spectroscopy systems other than VSRS.
• Assists with the integration of the optical spectroscopic hardware (spectrometers, but also calibration light sources, power meters, alignment camera, fibre optics ...) with the more standard I&C hardware (fast and slow controllers, network switches, data acquisition chassis ...) of the VSRS diagnostic.
• Performs coding and validation the algorithms for the specific spectroscopic data analysis, alignment and calibration of the VSRS diagnostic. This is itself based on continuing the support the maintenance and coordination of the development of the CASPER code (visible spectroscopy modelling and analysis code).

Experience & Profile:

Professional Experience:
Less than 3 years

Education:​â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹â¶Ä‹
PhD or equivalent degree

Language Requirements:
Fluent in English (written and spoken)

Technical Competencies and Experience:

• Engineering, experimental or physics degree (Master or higher)
• Experience with visible spectroscopy (preferably of plasmas)
• Experience in computing, code development (preferably in python) and version control software (preferably with GIT)
• Knowledge of databases for atomic, molecular, nuclear and surface data
• Knowledge in integrated modelling environments
• Experience in working in a team (strong communication skills required)
• Experience in working on a project involving multiple developers
• Knowledge and experience with ray-tracers for fusion plasmas (preferably with Raysect and CHERAB) would be advantageous

Financial aspects

Paid by the HI, but under certain conditions as defined in the ITER Project Associates Scheme, IO could provide support

Fichier attaché

Template IPA HI Proposal V.2.4.0